4-port 10/100/1000Mbit/s gigabit ethernet Switch with 1x PoE input (LT PoE 90W) and 4x PoE output (LT-PoE 90W / IEEE802.3at or IEEE802.3af)

Highlights:

• 5 Port Gigabit Switch with 1 PD port and 4 PoE ports
• PD port gets powered by another PoE device via LT PoE or IEEE802.3af / at
• Each of the 4 PoE ports delivers max. 90 watt (depending on power )
• Optional: variable voltage input 12~48V/120W -  the 4 PSE ports deliver max. 115 watt in total or max. 30 watt per port, or 56V/500W via external power supply
• Non-blocking & non-head-of-line blocking, full wire speed forwarding
• Temperature control and protection of board and voltage transformer

completely independent of sockets and power supplies

The ALLNET ALL048605PD switch can be powered by an external power supply or PoE with the required energy as well. In addition, the switch is also able, to supply up to four PoE enabled devices over the network cable simultaneously with data and power! Cable length max. is 100 meters in both directions. This allows for a distance up to 200 meters, thus guaranteeing maximum flexibility in the supply of the devices. This allows an outstandig flexibility in the choice of installation of your IP cameras or wireless access points as well.

3 voltage inputs for optimal supply

The power supply of this device can be done by three different ways:

1. PD port via another PoE device or Injector (max. 90W).

2. Variable DC power input, with up to 90W (10s) and 60W output with permanent 12V input.

3. Fixed DC input with 56V and up to 500W.

Technical details:

Element	Specification
Standards:	IEEE 802.3af, IEEE 802.3at IEEE 802.3 10BaseT IEEE 802.3u 100BaseTX IEEE 802.3ab 1000BaseT IEEE 802.3x Flow Control
Details:	Number of ports: 5 10/100/1000BaseT(X) 1x PD-port and 4x PoE-ports MAC addresses: 8K Buffer memory: 1Mbit Type: store-and-forward
Connections:	10/100/1000BaseTX Cat5 UTP/STP, or better 8-wired CAT6
LEDs:	Per port: ETH LINK/ACT, PoE PSE LINK, 1 LED per input
Power supply via PoE (PD-input)	PD-Port gets power from another PoE/PSE device 4 Ports share max. 85W or the voltage of the supplying device minus 5,5W own consumption.
Variable power supply from 12~48V  (power supply, accu, solar, etc…) Attention: Voltage must be below 48V.	Optional: DC 12~48V with max. 120W 4 Ports share 115 watt, max. 30 watt per port
Power from external power supply	Optional: DC 56V with max. 500W 4 Ports share 360W, max. 90 watt output per PoE-port
Dimensions	196×79×34 mm (LxDxH)
Weight	0.35 kg
Temperature (operation)	0 - + 40°C
Temperature (storage)	-20 - +90°C
Humidity	10 - 90% RH (non condensing)