Contactez-nous
FR
Langue
Allnet France SAS
Devenir un revendeur
FR
Langue
Home ALLNET Apollo full managed Layer2+ 10Port • 8x 2.5GB • PoE Budget 240W • 8x PoE at • 2x SFP+ • Apollo • ALL-SGC5410PM-10G

ALLNET Apollo full managed Layer2+ 10Port • 8x 2.5GB • PoE Budget 240W • 8x PoE at • 2x SFP+ • Apollo • ALL-SGC5410PM-10G

ALLNET
Code: 221097
EAN: 4038816221094
Marque: ALLNET
MPN: ALL-SGC5410PM-10G

Highlights:

  • 8x 2.5GbE PoE Ports
  • 2x SFP+ 10G Ports for Uplink
  • Support PoE IEEE802.3af / at with max. 30W per Port
  • PoE Budget 240W
  • Supports Jumbo Frames
  • Support IGMP snooping v1/v2/v3
  • Support Link aggregation
  • Support Loop protection
  • Support Spaning Tree Protocoll (STP) and Rapid Spanning Tree (RSTP)
  • Works as standalone switch or with Apollo controller (see ALL-AC100)

There are more and more applications that need a faster Ethernet switch. ALLNET Apollo's MultiG switches support faster Wi-Fi 6/6E/7 APs, accelerate large file uploads and downloads, make video conferencing smoother and prevent jitter.

2.5G / 10G Devices Ecosystem

\"\"

\"\"

Application

Multi-GE

\"\"

\"\"

Feature

Multi-GE access interface

The uplink bandwidth of WLAN APs has been increased from 2.5 Gbps in 802.11ac to 5 Gbps or 10 Gbps. Traditional gigabit access cannot meet the uplink bandwidth requirements of APs. Emplus’s Multi-GE switches the ports support 100M*/1/2.5Gbps even 5G/10Gbps(SMX series) auto-sensing, meeting the bandwidth requirements of high-speed wireless APs in the Wi-Fi 6 era. In response to the next-generation Wi-Fi standard (Wi-Fi 7), Emplus’ Multi-GE switch family with Wi-Fi 7 features will be coming soon.

Multi-GE switch ports with auto-negotiation of 100Mbps, 1Gbps, 2.5Gbps, and 5Gbps speeds on existing Cat5e cable, and all the way up to 10-Gbps speeds over newer Cat6a cabling (below table).

Cable 1 G 2.5G 5 G 10G
Cat5e • • • N/A

Cat6

•

•

•

•
(55m)
Cat6a • • • •

*100Mbps does not support half-duplex mode

\"\"

Spanning Tree Protocol (STP)

Supports standard IEEE 802.1D STP, IEEE 802.1w Rapid Spanning Tree Protocol (RSTP) for faster convergence.

Loop protection

If the switch detects a loop, it disables the source port from forwarding data packets originating from the switch to avoid broadcast storms.

Jumbo frame support

Supports up to 10K bytes frame size to improve the performance of large data transfers.

IGMP snooping v1/v2/v3

Improves network performance through multicast filtering, instead of flooding traffic on all ports.

Link aggregation

Groups together multiple ports up to a maximum of eight (8) ports per trunk automatically using Link Aggregation Control Protocol (LACP).

Software Features - Apollo

System Information
System Name
System Location
System Contact
System System Features

IPv4 Settings
-IP address / Subnet mask
-DHCPv4

IPv6 Settings
-Global address
-Link-local address
-DHCPv6

Domain Name System (DNS)
-IPv4 (Support 4 Servers)
Port

Port Configuration
-Speed configuration
-Flow control (802.3x, back pressure)
-Port description (support 128 bytes)
-Port extend mode
IEEE 802.3az Energy Efficient Ethernet (EEE)
L2

MAC Address Table
-MAC address table (16K)
-Age Time
-Static MAC address

Jumbo Frame
-Per-Port/Per-system (9216 bytes)

Spanning Tree
-802.1w rapid spanning tree
-802.1s multiple spanning tree
-MSTP instance (16 instances)
-Per device BPDU forward
-Per port BPDU forward
-Per port BPDU Filter
-Per port BPDU Guard
-Per port Root Guard
-Edge port mode
-Point to Point mode
-Per port admin state
L2

Loopback detection
-STP independent + port base shutdown only

Multicast Filtering
-Unknown Multicast Drop (unregistered multicast filtering)
-Unknown Action-Drop/Flood/Router Port

Multicast Group
-Support Max. multicast group (256 groups)

IGMP Multicast Forwarding
-MAC Group Address FDB

IGMP Snooping
-Support v1, v2, v3 awareness
-IGMP snooping fast leave (per-vlan)
-IGMP querier
-Dynamic router port
-Static/Forbidden router

MLD Multicast Forwarding
-MAC Group Address FDB
-IP Group Address FDB

MLD Snooping
-Support v1
-MLD snooping fast leave (per-vlan)
-MLD querier
-Dynamic router port
-Static/forbidden router

802.3ad Link Aggregation
-Static Trunk
Max. 8 ports/group
Max. 8 groups per device
-Dynamic Trunk (LACP)
Max. 8 ports/group
Max. 8 groups per device
-Load Balance Algorithm (source/destination MAC, VLAN, EtherType, source/destination IP address, TCP/UDP ports)
-LA description
802.1ab Link Layer Discovery Protocol (LLDP)

EOAM
-SFP information, SFP+ DDM
-Cable diagnostic
-Port statistics
DHCP

IPv4 DHCP Relay
-DHCP Relay
-Max. IPv4 DHCP servers
-Option82 Status
-Option82 Strategy (Keep/Replace/Drop)

IPv4 DHCP Snooping
-DHCP Snooping
-Binding list
-Statistics
VLAN
802.1Q Support

VLAN Group
-VID from 1-4094 (Max. 256 VLAN groups)

GVRP
-Dynamic VLAN groups
-Per port / device enable / disable
-VLAN advertisement
Voice VLAN
L3 Interface

Multiple IP Interface
-Max. 4 IP interfaces
-Max. 4 Ip v4 address
-20 IPv6 address (shared for both link local and global address)

ARP Table
-Max. 192 ARP entries

Static ARP
-Static 192 ARP entries (Share with ARP Table)
ARP Age Time

IPv6 Neighbor Discovery Table
-Max. 42 ND entries

Static IPv6 Neighbor Discovery
-Static 42 ND entries (Share with IPv6 Neighbor Discovery Table)
L3 Routing

IPv4 Static Route and Default Route
-Max. 63 entries

IPv4 Default Route
-Max. 1 entry
IPv4 Route Table

IPv6 Static Route
-Max. 21 entries

IPv6 Default Route
-Max. 1 entry
IPv6 Route Table

Interface specific select
-Per VLAN
RIP
OSPF
L3 IP Multicast

IGMP
-IP group address FDB

MLD
-IP group address FDB
QoS

Trust Mode
-Cos/802.1p
-DSCP
-CoS/802.1p-DSCP

Per Port Trust Mode
-Enable-follow the global trust type
-Disable-Always go to the lowest priority queue.

Queue
-Number of priority queues supported-8
CoS Mapping
CoS Based on 802.1p Priority
CoS Based on Physical Port
CoS Based on DSCP/TOS

Scheduling Mechanism
-Strict/WRR/Strict + WRR
Queue Weight Bandwidth

Bandwidth Control
-Rate limit according to network speed 16kbps~1000Mbps-in step of 16kbps
Advanced QoS
Security

802.1X Authentication Protocol
-Local/RADIUS/TACACS+
802.1X Port-based Access Control
802.1X Authenticated Hosts
802.1X Guest VLAN
RADIUS-VLAN assignment
EAP/RADIUS of Port Statistics
Port Security (Limited Dynamic Lock)

Storm Control
-Support broadcast/unknown multicast/unknown unicast 16kbps~1000Mbps - in step of 16kbps
Port Isolation (Protected Ports)
DOS Attack Prevention

Access Control List (ACL)
-Ingress/Egress
-MC Based ACL
-IPv4 Based ACL
-IPv6 Based ACL
-MAC Range Mode
-IP Range Profile
-ACL Binding
-Action-Permit/Deny/Shutdown/Rate Limit
Management VLAN

Radius Server
-IPv4 / IPv6 / hostname(IPv4)
AAA

Login Authentication List
-Local
-Telnet/HTTP

Security Password
-Requires a user to generate a new means of authentication before access is granted to the device for the first time.

PoE management
-Power on/off per port
-Power class configuration (autoclass/userdefine)
-Power feeding with priority
-Power budget limit
PD LifeGuard

Account Manager
-Muti Privileges

Web Graphical User Interface (GUI)
-HTTP IPv4 / IPv6
-HTTPS IPv4 / IPv6

Web support multi-language
-Language support
SNMP v1/v2/v3 Support

RMON 1, 2, 3, 9
-Support 4 groups of RMON (1-statistics, 2-history, 3-alarms, 9-events)

SSH Server
-IPv4/IPv6
AAA

Telnet Server
-IPv4/IPv6

TFTP Client
-IPv4/IPv6

Port Mirroring
-Support 1 to 1 and many to 1
-Max. mirroring session-3
-Tx/Rx/both mirroring
Dual Images

Image upgrade/backup
-Firmware upgrade (TFTP/HTTP)

Configuration upgrade/backup
-TFTP/HTTP

Configuration Saving
-Manual/Auto Save

System Time
-Time setting/daylight saving

Simple Network Time Protocol (SNTP)
-IPv4/IPv6/hostname(IPv4) SNTP server
-Daylight Savings Time
-Port number for SNTP server

Web UI Supports Non-IE Browser
-Chrome, Firefox, Safari

SYSLOG
-Support log admin password/IP change activity enhancement
-Local logging-buffered/flash
-Remote logging-IPv4/IPv6/hostname(IPv4)
-Originator Identifier-None/Hostname/Ipv4/Ipv6/User Defined

SYSLOG Backup
-Buffered

Ping
-IPv4/IPv6/hostname(IPv4)

Trace Route
-IPv4/IPv6/hostname(IPv4)
Factory Default
Reboot Switch
Flick Reboot
MIB Support

MIB II
-RFC1213

Bridge
-RFC1493

RMON
-RFC1757

802.1p
-RFC2674

LLDP MIB
-RFC2863

Pubic Mib From Cloud Agent
-ReadOnly

Physical Interfaces

Multi GE PoE Switch
ALL-SGC5410PM-10G
330 x 44 x 230 mm

\"\"\"\"

Technical Details:

Multi GE PoE Switch

 

 ALL-SGC5410PM-10G

Copper Ports

8x 2.5GbE
SFP Ports -
SFP+ Ports 2x 10GbE
PoE Available Ports 8
PoE Standard 802.3af/at
PoE Power Budget 240W
Switch Chip RTL9302C

PHY

GPY241
PoE Controller RTL8238B

Flash Memory

16MB NOR
128MB NAND
SDRAM Memory 512MB DDR3
Packet Buffer 12Mbit
MAC Table Size 16K
Switching Capacity 80Gbps
Fan(s) 2
Power Supply Int. PSU 300W
Dimensions (W x H x D) 330 x 44 x 230
Operating Temperature 0°C to 50°C

Demande d'information

Souhaitez-vous recevoir plus d'informations sur ce produit ?

Abonnez-vous à notre Newsletter

Panier d'achat

0 Articles sélectionnés

Sous-total

€ 0,00
Voir le panier d'achats Procéder au paiement